How To Install Lighting KitKat ROM on LG G2 F320/S/K/L Smooth Rom

LG has already started rolling out the latest Android 4.4 KitKat update on the flagship LG G2. But it is possible that some of you have not received any update notification in Korea especially if you are running on a specific carrier. Getting rid of this issue may brother you a lot. But luckily we have now a well-featured Android 4.4 KitKat ROM for Korea LG G2 named “lighting kitkat”.

This LG G2 KitKat ROM will give you a lot to make like easy such as immersive mode, improved Google now, faster multitasking, wireless printing, and much more. Furthermore Lighting ROM will bring custom host file, battery tweak, Dalvik VM Tweaks, IPV4 Tweaks, GPU rendering, 4K Video recording, and more. You should feel improvements in performance as well. It is pretty light weight and based on stock 20B Kitkat firmware.

However it is imported to note that since it is custom firmware, you can expect some bugs like preferred network not sticking in boot. But it is fast, stable and smooth, so give it a try.

This guide shows you how to install lighting ROM on LG G2 F320S, G2 F320K, and G2 F320L.

Requirements

Lighting KitKat ROM is compatible with all of LG G2 variants, but specially optimized for following variants that developer mentioned: LG G2 F320S F320K, and F320L.
Make a backup of your device’s data as the below procedure can wipe everything. You can check Android backup guide to get this task done.
Download the LG G2 Lighting ROM From Here [ latest version ]
Disclaimer: Use everything at your own risk as Tech Egis will not be responsible if you damage the device arising from this use. You have been warned, so proceed carefully.


                                                    LATEST ROM HERE FIXED ALL

How To Install Lighting Android 4.4.2 KitKat ROM on LG G2

Step #1: In order to flash this LG G2 KitKat Lighting ROM, copy download file to root of your device’s storage not in any folder.

Step #2: Turn off your LG G2.

Step #3: Boot phone in recovery mode.

Step #4: Take nandroid backup of your current firmware as if you mess up anything wrongly, you will be able to go back to previous position with this backup. If you are using ClockworkMod recovery, navigate to Backup and Restore>Backup. If you are on TeamWin’s TWRP recovery, navigate to Backup option, there tick all of boxes and then swipe to confirm backup.

Step #5: Perform a wipe now. TWRP users need to tap on “Wipe” first, and then swipe to “Swipe to factory reset”. Once it’s finished, tap on “Wipe” again, there go to Advanced Wipe>System and then swipe to confirm action. If you are using CWM, select Wipe data/Factory reset first and confirm the action, then navigate to “mount and storage”, there select “format/system” and say yes to confirm the action.

Step #6: Select “Install” or “Install Zip”, select the ROM zip package and confirm installation (Note: You need to select your variant when Aroma installer appear).

Step #7: Select “reboot system now” or “reboot” to restart your G2.

Great, you have installed the Lighting KitKat ROM successfully on your G2. If you run into any roadblock, you can leave comments and let us know

Source- Techgris